Resin material “Clearboard liner with 2 with 2 bottles” PADICO Pajiko

Recommended for resin work!

You can put a warm liner mold on a clear board to create a free resin or clay plate.

When the liner mold is warmed, it becomes softer and adhesive, so you can put it on the clear board.
In addition, you can create two types of resin plates, 3mm and 6mm thick by changing directions.

The clear board can be irradiated from the back because it is transparent and hard to warp of the resin.
In addition, since clay is difficult to attach to the board, it is recommended for resin work and clay work.

* Do not solidify the resin on the back of the clear board. You will not be able to get it from the board.
* Cannot be used in a microwave or oven.

[Resin resin mold clear board UV resin clay]

Size: Clear board Approximately W100 D6 H150mm Liner Mold Approximately W6 D3 H125mm
Material: thermal hardening resin, Boligar Bonade (back of the clear board)
Quantity: One clear board (heat resistant temperature of about 80 C) and 2 liner mold (approximately 30 to 50 C used)

* Products with special price and notation are not eligible for discounts because they are set at a price that is worth all customers.
* It may differ slightly from the real color depending on the monitor.