Clay resin type “Soft mold Hiragana C-561”

Resin or clay!

It is a type (mold) that can be used for chemical changes such as oven clay, silver clay, UV gel, resin, acrylic powder, and foam urethane, as well as normal dry clay.
You can easily make parts such as hiragana and numbers just by packing clay in a mold. It can also be used for UV hardening material because it transmits ultraviolet rays.

[Mold clay silicone silicone mold parts frame name plate]

Size: 6mm x 6mm -6mm x 3mm
Used material: Resin clay, oven clay, silver clay, UV gel, resin, acrylic powder, foam urethane
Unusable material: Silicone material
Material: SiliconeElastic cord

* Please note
Clay parts may be small and difficult to pack. In that case, if you use “Stainless Steel Modela”, you can pack it while holding down the clay and remove it.

Since it is not an epoxy mirror finish, it is cloudy when it is removed after curing. Polish with an abrasive to make it more transparent.

UV resin Because it is not a mirror finish, it is cloudy when it is removed after curing. Apply a UV resin or glossy varnish twice and coat the surface. The use of an abrasive depends on the UV resin used.

Silicone wood It cannot be used because it is assimilated during hardening.

* Products with special price and notation are not eligible for discounts because they are set at a price that is worth all customers.
* It may differ slightly from the real color depending on the monitor.