Boost Liquid Fortifier

Bulletproof foam? Not yet, but this is about as close as you will get!

When Boost liquid fortifier is mixed with our Foam Coat it makes it incredibly strong and weatherproof, plus makes it stick to almost anything! Typical proportion for Boost to dry mixture:

Click here for All Purpose Foam Coat Mixing Details and User Tips

Click here for Exterior Foam Coat Mixing Details and User Tips

Instructions:

MIXING: New formula does not require dilution. Its okay to mix water with Boost, but that will diminish Boosts strength. Start with 1 part liquid to 3 parts Foam Coat, and thin or thicken as desired. Thinning the Foam Coat with more Boost will not weaken it.

APPLYING: Fill large cracks and holes with pasty mixture. To coat large areas, add more liquid until thin enough to apply with a paint brush. May be applied as thick as 1/4 inch, but multiple coats are stronger. Try texturing surface before coating sets.

SET TIME: Use within 20 minutes. Sets hard in 1-2 hours. Maximum bond and hardness in 24 hours.

CLEAN-UP: Immediately clean tools and brushes with soapy water. Boost cannot be removed once dry.

FINISHING: May be painted or stained.

Suggested Dilutions Boost:Water
It’s best to use at 100% for maximum added adhesion and strength, but can be diluted up to 50% with water.

Additional Info:

WARRANTY:HWFFInc./dba Hot Wire Foam Factory warrants this product to be ofmerchantable quality when used or applied in accordance with theinstructions herein. The product is not warranted as suitable for anypurpose or use other than the general purpose for which it isintended. Liability under this warranty is limited to the replacement ofits product (as purchased) found to be defective, or at the shippingcompanies option, to refund the purchase price. In the event of aclaim under this warranty, notice must be given to The Hot Wire Foam Factory in writing. This limited warranty is issued and accepted inlieu of all other express warranties and expressly excludes liability forconsequential damages. MSDS available on request.

SDS